腾博tengbo9885官网-tengbo9885手机版网页-腾博tengbo9885登录

欢迎来到腾博tengbo9885官网官方网站!
腾博tengbo9885官网
您的位置: 首页 > 信然新闻 >
联系我们 Contact Us

腾博tengbo9885官网
销售热线:400-110-9566 
手机号码:13621769700
微信:18621809999 
Q Q: 57179620 
上海:021-33581065
   021-33580961 
地址:上海市嘉定区环城路2222号805 
徐州工厂:0516-89580911
     0516-89580933 
地址:江苏省徐州市丰县高新区1号 

信然新闻

Xinran Screw Steam Compressor Scheme

作者: 来源: 日期:2022/7/28 7:55:51 人气:162

Xinran Screw compressor steam compression recovery

Engineering technical scheme

SHANGHAI XINRAN COMPRESSOR CO.,LTD


1 project design conditions

1.1 projects of heat condition

The steam source conditions: saturated steam 0.1 MPa. A, 100 ℃, for compressed to 0.45 MPa. A, 145 ℃, steam 4 t/h;

Project name: screw compressor steam compression recovery project.

1.2 project construction site:

Installation location: design of unit installed near a owner waste heat sources of heat/steam plant.

1.3 the power requirements (can be adjusted according to the actual circumstance of the owner)

Screw compressor steam for electricity provided by the user is responsible for:

(1) control power supply: ac power AC380V, 3 phase, 50 hz;

(2) the power supply: compressor body and auxiliary power adopts ac power AC10000V, 3 phase, 50 hz;

1.4 water requirement (can be adjusted according to the actual circumstance of the owner)

Screw water vapor compressor mainly include: the unit steam humidity adjusting water;Mechanical seal with circulating cooling water;Lubricating oil system in circulating cooling water three parts.

The unit steam humidity control water use oxygen or boiler feed water;

Mechanical seal with use demineralized water circulating cooling water;

Lubricating oil system using cold water circulation industry cooling water;According to the industrial circulating cooling water treatment design specification (GB 50050-2007), cooling water water quality must meet the following requirements, can also according to the local water quality, but shall not be lower than in the table below standard:

ITEM

Allowed values

turbidity

≤6 NTU

hardness

≤150 mg/L

Total alkalinity

≤200mg/L

PH (25℃)

6.8~9.5

The oil content

≤1.6mg/L

The temperature

≤30 ℃

Cl2

0.06~0.33mg/L

Fe

≤0.33 mg/L

Cu

≤0.033 mg/L

Cl-

≤233 mg/L

S2O4-+Cl-

≤833 mg/L

SiO2

≤58 mg/L

Mg2+×SiO2

≤16000 mg/L

NH3-N

≤3.3 mg/L

COD5

≤3mg/L

2 equipment selection scheme

2.1 the screw compressor design parameters of steam

According to the heat source parameters and user requirements, design steam into screw compressor compression parameters after the ascension, compressed steam back to users continue to use the steam equipment.

Item

SREW  STEAM  AIR COMPRESSOR

SREW  STEAM  AIR COMPRESSOR

MODEL

XR-190-700

QTY

1  SET

The steam humidity adjusting the parameters of the warm water reduction

(optional)

Pressure:MPa.a

>0.5

The temperature:℃

102

The amount of water:t/h

0.5

Design inlet pressure:MPa.A

0.1

Design inlet temperature:℃

100

Design into the steam dryness:

0.9

The design of exhaust steam pressure:MPa.A

0.45

The design of exhaust steam temperature:℃

145

Compressed steam:t/h

4

Compressor rated speed:r/min

3000

Compressor shaft power:kw

655

Frequency modulation motor

POWER:kW 

700

Voltage:V

10KV

frequency:Hz

30~50

2.2 Screw compressor equipment of steam

Item

Name

MODEL

QYT

UNIT

FACTORY

1

Screw compressor unit of steam

XR190—700(The whole device prizing)

1

SET

SHANGHAI XINRAN

1.1

MOTOR

XR190

1

PC

SHANGHAI XINRAN

1.2

PLCControl cabinet and the instrument

XR-TK

1

SET

SHANGHAI XINRAN

1.3

Lubricating oil system

With the host device prizing

1

SET

SHANGHAI

XINRAN

1.4

Seal cooling water system

With the host device prizing

1

PC

SHANGHAI

XINRAN

1.5

VSD MOTOR

700kW-10KV

1

SET

HENGSHUI MOTOR

1.6

The inverter

700kW-INVERTOR MOTOR

1

PC

XIWANG LANSEN

1.7

Steam humidity control system

With the host device prizing

1

SET

SHANGHAI XIRAN

1.8

Steam accumulator tank (inlet)


1

PC

SHENYANG RELI

1.9

Steam buffer tank


1

PC

SHENYANG RELI

1.10

Interface accessories

Interface companion flange, fasteners, anchor bolt, and sealing gasket

1

PC

SHANGHAI XINRAN

2.3 Equipment process

Note: the figure only said related system schematic diagram, see configuration table scope of supply.

Unit for main equipment overall dimensions and weight: (dimension estimates, specific length will be subject to the final design)

ITEM

NAME

MODEL

SIZE(M)

QTY

WEIGHT(T)

1

Screw compressor unit of steam

XR-190-700

5.5×2×2.5

1SET

10

2

PLC Control cabinet and the instrument

XR-TK

0.8×0.6×2.2

1SET

0.4

3

Inverter



1SET


4

Steam accumulator tank (inlet)



1SET


5

Steam buffer tank



1SET


Generating set around the room not less than 1.5 m, speed regulation and grid-connection control cabinet installed near the equipment for field observation operation control.

2.4 Lubricating oil system

Screw the lubricating oil system of steam compressor adopts circulation lubrication method, form a complete set of integrated lubricating oil system.

Three screw pump oil pump selection, operation, low noise, stable flow, can undertake high speed over a long period of time. Essential oil filter adopts double barrel oil filter, but in the case of non-stop switch to clean oil absorption, oil filter, guarantee the oil circulation is not affected.

Lubricating oil is chosen N46 turbine oil, work in high temperature has good emulsification oxidation resistance, lubricating oil pressure control in 0.1 ~ 0.3 MPa.Because oil circulation for a long time after use to cause a decline in the quality, in order to ensure the lubrication system of good lubrication effect, lubricating oil should be replaced periodically, design of lubricating oil use period for 1 year.

2.5 the cooling water system

2.5.1 steam humidity control system

Unit water steam humidity control, to ensure that the unit compressed gas parameters of steam temperature to satisfy the user requirements, to prevent exhaust overheating, ensure the security and stability of equipment operation.To avoid impact on compressed steam quality, humidity control water use oxygen/boiler feed water, provided by the user is responsible for.(parameters demanded to see the public media 2.6)

2.5.2 mechanical seal cooling system

Owner directly provide demineralized water, used in mechanical seal cooling unit.(parameters demanded to see the public media 2.6)

2.5.3 oil cooling

Using external loop to provide cooling to form a complete set of lubricating oil system, industrial cooling water provided by the user is responsible for.(parameters demanded to see the public media 2.6)

2.6 equipment public medium parameters and consumption

Unit to ensure safe and stable operation, but also must provide aided engineering medium for unit operations, the parameters are as follow:

ITEM

PROJECT

PARAMENT

1

Industrial circulating cooling water

Tempreture:℃

≤ 30

pressure:MPa.G

0.2~0.5

Oil system of circulating water:t/h

6

2

Demineralized water

Mechanical seal (cooling)

Tempreture:℃

≤ 35

pressure:MPa.G

0.2~0.5

Machine seal cooling water circulation:t/h

6

3

eduction of warm water

(with the exception of oxygen water/desalted water)

Tempreture:℃

102

pressure:MPa.G

> 0.5

water:t/h

0.5

4

Control power

Frequency:Hz

50±1

voltage:V

AC380V±10%

POWER:kW

10

5

MOTOR POWER

frequency:Hz

50±1

voltage:V

AC10kV±10%

power:kW

800

6

Lubricating oil

model:

46#compresor oil

installation of lubricating oil:L

500

Oil circulation quantity:L/min

80

3implementation plan

3.1 items and contents to be provided by users

1) The user provides the construction site of screw steam compressor unit;

2) The deoxygenated water, circulating cooling water and demineralized water required by the unit are connected by the user to one meter outside the corresponding access pipe of the unit, or to the corresponding inlet interface flange of the unit;

3) The heat source steam pipe is provided by the user and connected to the inlet flange of the screw steam compressor unit;

4) The user is responsible for the cable laying from the user's on-site power distribution cabinet to the screw steam compressor unit;

5) All energy media required on site are provided by users (including steam, circulating industrial cooling water, demineralized water, deaerated water, instrument air or compressed air, control and power supply, etc.).

3.2 contents provided by the supplier

1) According to the steam source conditions, we provide: screw steam compressor unit, speed control system, frequency conversion regulation system, import and export steam liquid separation tank and other equipment supply;

2) Installation and commissioning of screw steam compressor and control system;

3) Provide equipment list.

4) Relevant supply and installation data of equipment.

4 project benefits

Supporting equipment for the project: 1 set of screw steam compressor unit;

The main economic and technical indicators of the project are as follows:

ITEM

UNIT

Indicators

Unit parameters

Steam pressure after compression :

MPa.A

0.45

Steam temperature after compression :

145

Compressed steam volume :

t/h

4

Annual operation time of unit :

h

8000

Electricity consumption

Unit operating power :

kW

650

Annual power consumption :

10000kW.h

520

Annual power consumption cost (0.10  USD  / kWh)

10000USD/year

52

Water consumption

Industrial water volume (circulating water, temporarily excluded from consumption)

TON/YEAR

0

Softening water volume (circulating water, not included in consumption temporarily)

TON/YEAR

0

Desuperheating water volume

TON/YEAR

4000

Consumption cost of desuperheating water (water price 2USD/ ton )

USD/YEAR

4000

Steam recovery

Annual steam recovery of unit

TON/Year

32000

Unit steam recovery income (150USD/ ton)

USD/YEAR

640

Total economic benefits

USD/YEAR

600000

5. Conclusion

1. The screw steam compressor is used to recover low-pressure steam, reduce the emission of low-quality steam in enterprises, and realize the secondary recycling of energy.

2. Because the whole thermodynamic system of screw steam compressor is simple, the equipment can be directly transformed on the basis of the original pipe network system, so the whole field work quantity is small and the equipment covers a small area.

3. Screw steam compressor has simple structure, no complex parts, long service life, low maintenance cost, obvious economic benefits and short return on investment.

下一个:没有资料
腾博tengbo9885官网
销售热线:400-110-9566
微信:186-2180-9999 136-2176-9700
Q Q: 57179620
上海总部:021-33581065 ;33580961
地址:上海市嘉定区环城路2222号805
徐州工厂: 0516-89580911
徐州工厂:0516-89580933
地址:江苏省徐州市丰县高新区1号
留言板
版权所有:【信然集团】--上海信然压缩机公司 专业节能空压机,螺杆鼓风机,螺杆真空泵,水蒸汽压缩机,水井钻机,制氮机,永磁变频空压机,低压空压机,两级压缩空压机,压缩机,空分设备,膨胀发电机,离心压缩机,柴油空压机,防爆空压机,氢能源设备,激光切割机,蒸气压缩机等产品制造商. 沪ICP备14023878号-1
Baidu
sogou